DR Self-Propelled Leaf and Lawn Vacuum (1:06)
Product Summary:
- Briggs & Stratton Intek OHV Engine: 7.0 HP (11.5 ft-lbs gross torque*)
- Electric-start and Manual-start available
- 3 Forward speeds, 1 reverse
- 37 gal collector capacity (dry gallons)
- Powerful shredding mechanism significantly reduces waste from its original volume
- Lifetime solid steel Impeller
Warranty Coverage:
- 90 Day Limited Warranty
No Tractor? No Problem!
Our self-propelled model is just right for cleaning up tight corners, extra hilly areas (up to 20 degree slopes), or for those without a lawn tractor.
This unit creates tremendous suction for collecting leaves, grass clippings, pine cones, pine needles and more... while you move forward at a comfortable walking speed. You'll get great results in a fraction of the time it would take to do the job by hand!
In highly-landscaped areas, our self-propelled model is a nimble performer. Get up close to flower beds and shrubs without risk of damaging valuable plants. Work tight along foundations, stone walls and fences.
3 forward speeds plus one reverse let you set the pace
The self-propelled DR Leaf and Lawn Vacuum is ideal for rolling terrain and hilly yards. You'll effortlessly glide along on the open areas of your lawn or charge up hills, even with a full load. Large pneumatic tires smooth out the ride.
Optional vacuum hose gets all those hard-to-reach spots
For those areas you can't reach with your Leaf and Lawn Vacuum, we offer an optional Vacuum Hose Attachment. With 10-feet of hose you can clean up under shrubs, in window wells, along foundations, under decks — any hard-to-reach area.
Briggs and Stratton engine will never leave you wanting more
This high performance engine is far more powerful than engines found on other walk-behind lawn vacs. And it's that extra power that gives the DR Leaf and Lawn Vacuum tremendous vacuum suction for unbeatable performance.
Instant height control lets you adjust the vacuum's height for terrain conditions
A single-lever height adjustment allows you to set the vacuum's intake height. Use the higher settings when collecting a thick carpet of leaves. Set the nozzle low for matted wet leaves, pine needles, and nuts.
Built-in wood chipper chips branches as you go
Say goodbye to ugly brush piles. The DR Leaf and Lawn Vacuum is available with a built-in high-speed chipper that makes fast work of prunings, small saplings, and branches up to 2 inches in diameter. As a branch is run through the chipper, the wood chips are deposited into the collection bag, so there's nothing to pick up or clean up after chipping.
Solid steel impeller comes with a lifetime warranty
All lawn vacuums have an impeller. But only the DR Leaf and Lawn Vacuum features an impeller with a Lifetime Warranty. Made of solid steel, our impeller is guaranteed against bending or breaking for as long as you own your machine.
| Dimensions | |
|---|---|
| Height | 43" |
| Length | 67" |
| Shipping Dimensions | 40" L x 30" W x 39" H |
| Shipping Weight | 233 lbs |
| Weight | 216 lbs |
| Width | 25 1/2" |
| Engine | |
|---|---|
| Air Filter | Paper |
| Engine Type | OHV |
| Ft Lbs Torque | *11.5 ft-lbs gross torque (per SAE J1940) |
| Horsepower | 7.0 HP |
| Make | Briggs & Stratton |
| Model | Intek |
| Number Of Cylinders | 1 |
| Starting Type | Electric |
| Fuel_System | |
|---|---|
| Fuel Capacity | 2.9 qt |
| Hauling | |
|---|---|
| Hauling Capacity | 37 gallons |
| Weight Capacity | 80 lbs |
| Wheels Tires | |
|---|---|
| Front Tire Size | 8" x 1 3/4" solid rubber |
| Rear Tire Size | 10 1/2" x 3 1/2" pneumatic |
| Warranty | |
|---|---|
| Machine Warranty | 90 Day Limited Warranty |