text.skipToContent text.skipToNavigation
DR Horizontal-Vertical Log Splitter

DR Horizontal-Vertical Log Splitter

PREMIER 25T (25-Ton)

 (27  reviews)
Sale: $1,499.99
TOP
Log in or create an account to favorite

DR Horizontal-Vertical Log Splitter

PREMIER 25T (25-Ton)
 (27  reviews)
List:$1,799.99
Sale:$1,499.99
In Stock
Free Shipping to Your Home
Ships in 1 to 3 Business days

Restrictions may apply.
49-State (Not available for sale in CA)

OTHER MODELS
OVERVIEW
OVERVIEW

Horizontal-Vertical Design

The DR Power PREMIER 25T Horizontal/Vertical splitter is designed for easy transition between horizontal and vertical configurations. The horizontal mode is easiest for most splitting tasks. But when you come across an extra big round, you can save yourself a lot of strain by simply pulling out a pin, easily rotating the unit into its vertical position, and splitting the log on the ground...no lifting required!

An easy-starting DR 6.2 HP engine powers the 2 stage pump (11 GPM), generating 3700psi of splitting force. Logs up to 30" in diameter and up to 24" long are no problem. And the PREMIER 25T's 15-second cycle time makes it one of the fastest hydraulic splitters in its class.

Road-Towable

A 2" ball hitch with safety chains comes standard, allowing you to tow the unit at speeds up to 45 mph on its big 16" DOT-approved tires. The jackstand folds up for transport, locking into place with a simple cotter pin.

FEATURES
FEATURES
Switch from horizontal to vertical position on a DR log splitter

Easy Conversion

Switching from horizontal to vertical mode (or vice versa) takes only a few seconds. Just slip out a pin, rotate the unit, and re-insert pin to lock it into position. Lets you split those really big rounds without lifting the log onto the beam.

Kohler engine on a DR vertical/horizontal log splitter

DR Engine

Easy-starting DR 6.2 HP engine powers the hydraulic pump. Warranted for 2 years in residential use (90 days commercial).

Hydraulic pump on a DR vertical/horizontal log splitter

Rugged Hydraulics

Hydraulic pump generates 3700 psi in the cylinder (4.1" bore). Steel piston compression seals provide consistent power...year after year.

2-inch tow ball hitch on a DR vertical/horizontal log splitter

Easy Towing

A 2" ball hitch comes standard (with safety chains) allowing for road towing at speeds up to 45 mph. Durable, 16" DOT-approved tires. Jackstand folds up for transport.

SPECS
SPECS
Fuel_System
Fuel Capacity 0.8 gal
Engine
Air Filter Dual Element
Cooling Methods Air
Displacement 212cc
Engine Type OHV
Horsepower 6.2 HP
Lubrication Splash
Make DR
Number Of Cylinders 1
Oil Capacity 16.9 oz
Oil Type SAE 30W HD
RPM Speeds 3600
Starting Type Manual
Dimensions
Height 40.6"
Length 89.5"
Shipping Dimensions 71"L x 27"W x 20"H
Shipping Weight 515 lbs
Weight 440 lbs
Width 51.3"
Working Height 30"
Wedge Height 7"
Wheels Tires
Number of Tires 2
Tire Size 16" x 4.8" Tube Tires
Wheel Steel Wheel with Taper Roller Bearings
General
CARB Certified Yes
Hydraulics
Hydraulic Pressure 3700 PSI MAX
Pump 2 stage / 11-13 gpm (max)
Reservoir 4 gal
Towing
Hitch Type 2" Ball
Max Highway Speed 45 MPH
Towable Yes
Splitting
Average Cycle Time 12 Seconds
Max Log Diameter 30"
Max Log Length 24"
Splitting Force 25 ton
Warranty
Engine Warranty 2 Year Residential, 1 Year Commercial
Manufacturer Warranty 2 Year Residential, 90 Day Commercial
REVIEWS
REVIEWS
    4.2
    27reviews
    5
    13
    4
    8
    3
    4
    2
    2
    1
    0
    Loading
    No Result Found
    James
    Hinckley, MN

    22 Ton splitter

    Used the unit works great. Quiet plenty of power. I put a jack stand to move it around easy.

    FRED
    CONCORD, MA

    HORIZLOG

    It was a big surprise to me that we had to assemble the machine. I did not see this on your website or catalog. We managed to get all the parts together with some advice from DR concerning forcing the log trays to fit. So far we have processed 2 trees and it seems to split easily and so far no injuries. I would give it 5 star but cannot because of limited use. Ask again next year and mention customer assembly in your brochures.FF

    FRED S

    HORIZLOG

    It was a big surprise to me that we had to assemble the machine. I did not see this on your website or catalog. We managed to get all the parts together with some advice from DR concerning forcing the log trays to fit. So far we have processed 2 trees and it seems to split easily and so far no injuries. I would give it 5 star but cannot because of limited use.

    Jay b
    whitinsville, MA

    22 ton spliter

    The 22 ton spliter is well built but is almost impossible to start in cold weather when it finally started after 2 hours it ran good and split wood fine day 2 it took 3 hours to start spliter worked good for 15 minutes than starter blowing hidrolic oil out of the resivor when I asked the dealer about the cold start he said all small engines are hard to start in the cold. I do most of my splitting in the cold other spliters I have had started mutch better in the cold.

    Jay b

    22 ton spliter

    The 22 ton spliter is well built but is almost impossible to start in cold weather when it finally started after 2 hours it ran good and split wood fine day 2 it took 3 hours to start spliter worked good for 15 minutes than starter blowing hidrolic oil out of the resivor when I asked the dealer about the cold start he said all small engines are hard to start in the cold. I do most of my splitting in the cold other spliters I have had started mutch better in the cold.

    Loading
PRODUCT Q&A
PRODUCT Q&A

    Q.I'm in California and competing products are cheaper, especially after freight. Why should I consider a DR Split

    A.We can't speak for other companies and how they choose their pricing, but I can tell you that our products are built to last. Our splitters are solid machines and have been thoroughly run tested here on our property in Vermont. We back this with a 2 year warranty, with the option of extending to a full 5 years. You will also receive lifetime tech support. I would be happy to supply you with specific specs if there was a model in particular you were referring to. If you are concerned with the shipping cost, we do have Independent Dealers. Here is a link to our dealer locator. Here you can find all of the dealers in your area. Please keep in mind that being that all dealers are independent. Pricing and availability may vary. http://www.drpower.com/shop.axd/StoreLocator Thank you for your inquiry.

    Posted by:Anonymous from California, CA on 10/15/2020

    Show Answer

    Q.Does this run on gas or is it electric?

    A.The DR 22 Ton Horizontal/Vertical Log Splitter is a gas powered splitter. Please contact us if you have other question's.

    Posted by:Anonymous from New York, NY on 10/15/2020

    Show Answer

    Q.Log Splitter manufacture location
    I had previously asked about the manufacturing location for the Rapid fire and duel action splitters. Are the DR still made in the USA, where are the manufacturing locations for the new Duel splitter and the new 22 Ton horizontal/vertical splitters?

    A.Thank you for your inquiry. The Rapid Fire is assembled in the US. Parts are sourced world-wide. Dual Actions and Horizontal Vertical Splitters are manufactured in China and assembled by the customer. I hope that this answers your questions. If you'd like to order any of these items please call us at 800-376-9637 or simply place them in your shopping cart online.

    Posted by:Anonymous from Alaska, AK on 10/15/2020

    Show Answer

    Q.Does the 22 ton model's blade automatically return after splitting is completed?

    A.Thank you for your inquiry. To begin the retraction of the ram it is necessary to push the lever into retract mode. Once there it will "lock" into place and the ram will automatically continue to retract until it reaches the end of the cycle, then the lever will spring back into the neutral position. I hope that this answers your question. If you'd like to order this splitter, please call us at 800-376-9637 or simply place it in the shopping cart online.

    Posted by:Anonymous from Montana, MT on 10/15/2020

    Show Answer

    Q.can products be picked up at the dealer?

    A.To pick up product at the dealer, you'll need to order from that dealer. Our dealers provide great service their pricing is competitive, but may vary. Thank you for your inquiry.

    Posted by: Anonymous from Milford, MA on 10/15/2020

    Show Answer
    Loading
SHIPPING
SHIPPING

SHIPPING


Motor Freight Shipping


We offer easy shipping and delivery options within the United States.
Please see below for rates and details. You will select your shipping option during checkout.

Home Delivery

Normally $299.99 NOW FREE!

View Details navigaterightWatch Video navigateright

Liftgate Service (Home or Business)

Normally $349.99 NOW $49.99!

View Details navigaterightWatch Video navigateright


For customers unable to accept delivery at their homes, we offer these alternative delivery options:


Trucking Depot Delivery

Normally $199.99 NOW FREE!

View Details navigaterightWatch Video navigateright

Business Delivery

Normally $299.99 NOW FREE!

View Details navigaterightWatch Video navigateright

OTHER ITEMS
OTHER ITEMS

Recommended For You