Customer Photos

Snow plow 72inch
Work well
Very good !!!
I just had 12 " of snow and waited until it was all over to plow. It hooked easy to the plow and off I went. Its very smooth and does a great job. I checked it after a but and it didnt come loose. It cut my plow time in half !!! I would recommend this plow.
clamp-on grader/snow blade, 72
hard to remove and install swing pin without lifting blade
like
The blade is just what I thought it would be, if it moves snow like it moves gravel it will be grate.
Fantastic Value
Love it so far.. Easy on and easy off. But winter will tell :)

Q.What is the height of the blade?
A.Thank you for your question. The Clamp-on Tractor Blade is 18.5"H Please let us know if you have any other questions.
Posted by:JOHN J from Parkman, ME on 06/04/2021
Q.Is there a rubber cutting edge (for snow) available?
A.Thank you for your question. If you have a Redi-Plow already and need a replacement rubber part please contact our Technical Department for assistance. They can be reached at 1-800-687-6575.
Posted by:RICK W from DUVALL, WA on 11/26/2020
Q.Is there a rubber cutting edge (for snow) available?
A.Thank you for your question. If you have a Redi-Plow already and need a replacement rubber part please contact our Technical Department for assistance. They can be reached at 1-800-687-6575.
Posted by:RICK W from DUVALL, WA on 11/26/2020
Q.What is the total width of part that mounts in the tractor bucket. I have a 60" wide bucket.
A.The dimensions of the sub-frame that mounts to the tractor bucket are:
34-1/2"W x 11"D x 10-1/2"H
It is constructed of 3/8" thick 1" x 1-1/2" steel and the angle iron and bar stock reinforces the bucket to make it stiffer.
Thanks for your question. ph
Posted by:Richard S from Quakertown, PA on 10/15/2020
Q.What is the height of the blade?
A.Thank you for your question. The Clamp-on Tractor Blade is 18.5"H Please let us know if you have any other questions.
Posted by:JOHN J from Parkman, ME on 10/15/2020
